A High-Gain Reflector- DGS-Superstates -Enabled Quad-Band 5G-Antenna for mm-wave Applications

Authors

  • Aafreen Khan Department of Electronics and Communication Engineering, Jamia Millia Islamia, New Delhi, India
  • Anwar Ahmad Department of Electronics and Communication Engineering, Jamia Millia Islamia, New Delhi, India
  • Maksud Alam Department of Computer Science and Engineering, Galgotia College of Engineering and Technology, Greater Noida, India

DOI:

https://doi.org/10.5281/zenodo.8363039

Keywords:

Quad Band, Gain, DGS, mm-wave

Abstract

The mm-wave antenna, consisting of a reflector, a DGS structure, and two superstates using Taconic (CER-10) and silicon, has been presented in this article. In the proposed antenna, a DGS with a reflector and two superstates is implemented to improve the antenna performance characteristics. The designed configuration (ANT-S5) is resonating on four mm-wave bands m1=41.7241GHz (41.1102-42.347) GHz, m2=48.9655GHz (48.637-49.1061) GHz, m3=63.2414GHz (61.142-66.137) GHz, m4=76.069GHz (73.4655-78.859) GHz and the maximum achieved gain is 12.02dBi at the 41.3103GHz along with the AR<3dB bands (76.1777-77.2794) GHz, (69.662-70.509) GHz. The designed antenna has been simulated on HFSS software and is convenient for 5G mm-wave applications.

Downloads

Download data is not yet available.

Published

20-09-2023

How to Cite

Khan, A., Ahmad, A., & Alam, M. (2023). A High-Gain Reflector- DGS-Superstates -Enabled Quad-Band 5G-Antenna for mm-wave Applications. Transactions on Electromagnetic Spectrum, 3(1), 34–50. https://doi.org/10.5281/zenodo.8363039

Issue

Section

Articles

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.